Article Information
PubMed
Published By
Print ISSN
Online ISSN
History
- Received November 25, 2008
- Accepted after revision January 11, 2009
- Published online June 11, 2009.
Article Versions
- Latest version (March 25, 2009 - 06:33).
- You are viewing the most recent version of this article.
Copyright & Usage
Copyright © American Society of Neuroradiology
Author Information
- Please address correspondence to Matthew J. Gounis, PhD, Department of Radiology, University of Massachusetts, 55 Lake Ave N, SA-107R, Worcester, MA 01655; e-mail: matt.gounis{at}umassmed.edu
Altmetrics
Cited By...
In this issue
Jump to section
Related Articles
Cited By...
- Double stent-retriever as the first-line approach in mechanical thrombectomy: a randomized in vitro evaluation
- Development of a clot-adhesive coating to improve the performance of thrombectomy devices
- Fluid-Structure Interactions of Peripheral Arteries Using a Coupled in silico and in vitro Approach
- Development of a clot-adhesive coating to improve the performance of thrombectomy devices
- Preclinical testing platforms for mechanical thrombectomy in stroke: a review on phantoms, in-vivo animal, and cadaveric models
- Endothelialized silicone aneurysm models for in vitro evaluation of flow diverters
- Biomodex patient-specific brain aneurysm models: the value of simulation for first in-human experiences using new devices and robotics
- Modelling the impact of clot fragmentation on the microcirculation after thrombectomy
- Complete clot ingestion with cyclical ADAPT increases first-pass recanalization and reduces distal embolization
- A patient-specific intracranial aneurysm model with endothelial lining: a novel in vitro approach to bridge the gap between biology and flow dynamics
- Development of a high resolution MRI intracranial atherosclerosis imaging phantom
- An in vitro evaluation of distal emboli following Lazarus Cover-assisted stent retriever thrombectomy
- Quantitative assessment of device-clot interaction for stent retriever thrombectomy
- Three-dimensional printing of anatomically accurate, patient specific intracranial aneurysm models
- Risk of distal embolization with stent retriever thrombectomy and ADAPT
- 3D Printing of Intracranial Aneurysms Using Fused Deposition Modeling Offers Highly Accurate Replications
- Aneurysm permeability following coil embolization: packing density and coil distribution
- Early detachment of the Solitaire stent during thrombectomy retrieval: an in vitro investigation
- MR Imaging of Myeloperoxidase Activity in a Model of the Inflamed Aneurysm Wall
- Preclinical Investigations for Thrombectomy Devices--Does it Translate to Humans?
- Reduction in Distal Emboli With Proximal Flow Control During Mechanical Thrombectomy: A Quantitative In Vitro Study
- Porcine Brachial Artery Tortuosity for In Vivo Evaluation of Neuroendovascular Devices
- Effectiveness of Mechanical Endovascular Thrombectomy in a Model System of Cerebrovascular Occlusion
- The Effect of Intracranial Stent Implantation on the Curvature of the Cerebrovasculature
- Preclinical acute ischemic stroke modeling
- O-023 Pre-clinical model of porcine arterial tortuosity for in vivo testing of neuroendovascular devices
- The impact of coil shape design on angiographic occlusion, packing density and coil mass uniformity in aneurysm embolization: an in vitro study